Aluminum 5052-H32 is generally considered a suitable material for prototype stamping applications. Here are the key reasons why:
1. Formability: Aluminum 5052-H32 has good formability and can be readily stamped into complex shapes without cracking or tearing. The H32 temper provides a balance of strength and ductility that allows the material to be easily formed.
2. Strain Hardening: The work hardening characteristics of 5052-H32 allow it to maintain its shape and dimensional stability after the stamping process. The strain hardening helps prevent springback and distortion of the stamped parts.
3. Corrosion Resistance: The corrosion resistance of 5052-H32 is an important consideration for prototype stamping. This alloy can withstand exposure to various environments without excessive degradation, making it suitable for functional prototypes.
4. Availability and Cost: 5052-H32 aluminum is a widely available and relatively economical material, which is important for cost-effective prototype development.
5. Weldability: The weldability of 5052-H32 allows for easy joining and assembly of stamped components, which is useful for creating functional prototypes.
These characteristics make 5052-H32 a popular choice for prototype stamping applications like sheet metal prototype fabrication, prototype bending and deep draw stamping prototypes, where the ability to form complex shapes, maintain dimensional stability, and withstand corrosion are important. The material's overall versatility and cost-effectiveness also contribute to its suitability for prototype development and low-volume production runs.
The chemical data and mechanical data of aluminum alloy 5052-H32 are as the following table for reference.
| Raw Material Properties |
Material Grade/
Description |
Chemical Composition (weight %) |
T.S
(Mpa) |
Y.S
(Mpa) |
EL |
Hardness |
| (Cu) |
(Si) |
(Fe) |
(Mn) |
(Mg) |
(Zn) |
(Cr) |
(Ti) |
| Aluminum 5052-H32 |
<=0.1 |
<=0.25 |
<=0.40 |
<=0.1 |
2.2~2.8 |
<=0.1 |
<=0.1 |
NA |
170～305MPa |
>=90Mpa |
>=10% |
120-160HB |
Product Tags:
|
|
AL 1.50mm sheet metal prototype fabrication used for appliances Images
|
